Plus de windows 10 boot secure

[panda666]

Bonjour.J'avais Wind10 installé et j'ai voulu le remplacé par Linux Mint 19.Mais j'ai fais la bêtise déffacé la partition de Win10. Du coup je ne peux meme pas installé Linux.Que faire svp?Merci 

[zelandonii]

Bonjour @panda666,

Quelle manipulation as-tu effectué pour effacer Windows ?

Donne nous succinctement la configuration de ton PC ?

Possède tu une clé de réinstallation Windows ?

Pourquoi dis-tu que tu ne peux même plus installer Linux ?

[panda666]

Bonjour Zelandonii, En réponse a vos questions c'est complexe pour moi suis débutant .En fait en voulant boooté le CD de Linux Mint 19 ons me demande  (cocher)écraser le disque ou dual-boot ou autres (partionné soit meme).Mais moi j'ai mis en 1er écrasé le disque.Mais ca na pas booté j'ai un message erreur et plus de Windows Boot Secure.Pour la configuration du pc je vous ais mis une piece jointe(hardinfo)je sais pas si ca vous suffit?Oui j'ai la clée de réinstallation mais comment mettre l'iso avec un logiciel Linux sur la clée?Je crois que mon disque dur a de sérieux problemes ca marque failed quand ca boot et le pc fait un claquement puit s'arrete de booté.Voila si vous avez besoin d'autres infos? je reste a votre écoute.Cordialement

hardinfo_report.html

[panda666]

Je vous envoies une copie d'écrans du disque:

[panda666]

Bonjour Mr , j'ai quand j'allume le pc sans (F11) page noir indiquant plusieurs lignes d'erreur:Initramfs unpacking failed, (sdb) no caching mode page found, failed READ FPDMA QUEUED, ect.Puit viens la page tres longtempt apres de Ubuntu lts 20.4 Budgie mais impossible de booté.Aider moi svp je suis perdus merci.Cordialement

[Invité]

uname -sr svp

[Invité]

suite forum ubuntu -fr.org : https://forum.ubuntu-fr.org/viewtopic.php?id=2054910

[panda666]

voila mr:Linux 5.4.0-26-generic

et ausi  sudo -a de smartctl (copie terminal)

sudo smartctl -i /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 3.5" DT01ACA... Desktop HDD
Device Model:     TOSHIBA DT01ACA100
Serial Number:    18AWL5TMS
LU WWN Device Id: 5 000039 fd5cc8a4a
Firmware Version: MS2OA8K0
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Thu Jul 16 16:55:33 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

ubuntu-budgie@ubuntu-budgie:~$ -a de smartctl
-a: command not found
ubuntu-budgie@ubuntu-budgie:~$ sudo -a de smartctl
usage: sudo -h | -K | -k | -V
usage: sudo -v [-AknS] [-g group] [-h host] [-p prompt] [-u user]
usage: sudo -l [-AknS] [-g group] [-h host] [-p prompt] [-U user] [-u user]
            [command]
usage: sudo [-AbEHknPS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p
            prompt] [-T timeout] [-u user] [VAR=value] [-i|-s] [<command>]
usage: sudo -e [-AknS] [-r role] [-t type] [-C num] [-g group] [-h host] [-p
            prompt] [-T timeout] [-u user] file ...
ubuntu-budgie@ubuntu-budgie:~$ sudo smartctl -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 3.5" DT01ACA... Desktop HDD
Device Model:     TOSHIBA DT01ACA100
Serial Number:    18AWL5TMS
LU WWN Device Id: 5 000039 fd5cc8a4a
Firmware Version: MS2OA8K0
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Thu Jul 16 16:59:48 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.

General SMART Values:
Offline data collection status:  (0x84)    Offline data collection activity
                    was suspended by an interrupting command from host.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:         ( 7458) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:      (   1) minutes.
Extended self-test routine
recommended polling time:      ( 125) minutes.
SCT capabilities:            (0x003d)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   057   057   016    Pre-fail  Always       -       658575820
  2 Throughput_Performance  0x0005   051   051   054    Pre-fail  Offline  FAILING_NOW 3019
  3 Spin_Up_Time            0x0007   199   199   024    Pre-fail  Always       -       100 (Average 131)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       553
  5 Reallocated_Sector_Ct   0x0033   001   001   005    Pre-fail  Always   FAILING_NOW 1997
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   113   113   020    Pre-fail  Offline      -       35
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       1073
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       553
192 Power-Off_Retract_Count 0x0032   069   069   000    Old_age   Always       -       38069
193 Load_Cycle_Count        0x0012   069   069   000    Old_age   Always       -       38069
194 Temperature_Celsius     0x0002   146   146   000    Old_age   Always       -       41 (Min/Max 11/47)
196 Reallocated_Event_Count 0x0032   001   001   000    Old_age   Always       -       3006
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       40
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 35682 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 35682 occurred at disk power-on lifetime: 1073 hours (44 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 00 6d 70 04  Error: UNC 8 sectors at LBA = 0x04706d00 = 74476800

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 00 6d 70 e0 08      04:10:38.336  READ DMA EXT
  c8 00 80 00 08 05 e0 08      04:10:27.196  READ DMA
  ef 10 02 00 00 00 a0 08      04:10:27.195  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 08      04:10:27.195  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      04:10:27.193  IDENTIFY DEVICE

Error 35681 occurred at disk power-on lifetime: 1073 hours (44 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 00 6d 70 04  Error: UNC 8 sectors at LBA = 0x04706d00 = 74476800

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 00 6d 70 e0 08      04:10:23.140  READ DMA EXT
  c8 00 80 80 07 05 e0 08      04:10:16.694  READ DMA
  ec 00 01 00 00 00 00 08      04:10:16.691  IDENTIFY DEVICE
  c8 00 80 00 07 05 e0 08      04:10:15.923  READ DMA
  c8 00 08 18 00 00 e0 08      04:10:15.919  READ DMA

Error 35680 occurred at disk power-on lifetime: 1073 hours (44 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 e8 58 b8 09 00  Error: IDNF 232 sectors at LBA = 0x0009b858 = 637016

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  35 00 40 00 b8 09 e0 08      04:10:13.046  WRITE DMA EXT
  c8 00 80 00 05 05 e0 08      04:10:13.012  READ DMA
  ef 10 02 00 00 00 a0 08      04:10:13.012  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 08      04:10:13.012  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      04:10:13.010  IDENTIFY DEVICE

Error 35679 occurred at disk power-on lifetime: 1073 hours (44 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 e8 58 b8 09 00  Error: IDNF 232 sectors at LBA = 0x0009b858 = 637016

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  35 00 40 00 b8 09 e0 08      04:10:10.705  WRITE DMA EXT
  c8 00 80 80 04 05 e0 08      04:10:10.669  READ DMA
  ef 10 02 00 00 00 a0 08      04:10:10.669  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 08      04:10:10.669  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      04:10:10.667  IDENTIFY DEVICE

Error 35678 occurred at disk power-on lifetime: 1073 hours (44 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 e8 58 b8 09 00  Error: IDNF 232 sectors at LBA = 0x0009b858 = 637016

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  35 00 40 00 b8 09 e0 08      04:10:08.787  WRITE DMA EXT
  c8 00 80 00 04 05 e0 08      04:10:08.649  READ DMA
  ef 10 02 00 00 00 a0 08      04:10:08.649  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 08      04:10:08.649  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      04:10:08.647  IDENTIFY DEVICE

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Selective offline   Completed: read failure       60%       927         502896
# 2  Short offline       Completed: read failure       50%       927         502896
# 3  Short offline       Completed: read failure       50%       926         502896
# 4  Short offline       Completed: read failure       50%       926         502896

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA     MAX_LBA  CURRENT_TEST_STATUS
    1        0  1953525167  Completed [00% left] (2075792-2141327)
    2        0           0  Not_testing
    3        0           0  Not_testing
    4        0           0  Not_testing
    5        0           0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

ubuntu-budgie@ubuntu-budgie:~$ sudo lsblk -o size -f 
  SIZE
  1.5G
 27.1M
   55M
 16.5M
 62.1M
158.4M
931.5G
  7.2G
  7.2G
 28.7G
 28.7G
 1024M
ubuntu-budgie@ubuntu-budgie:~$ sudo df -H
Filesystem      Size  Used Avail Use% Mounted on
udev            1.9G     0  1.9G   0% /dev
tmpfs           379M  1.9M  377M   1% /run
/dev/sdc1        31G  2.2G   29G   8% /cdrom
/dev/loop0      1.7G  1.7G     0 100% /rofs
/cow            1.9G  728M  1.2G  39% /
tmpfs           1.9G  266M  1.7G  15% /dev/shm
tmpfs           5.3M  4.1k  5.3M   1% /run/lock
tmpfs           1.9G     0  1.9G   0% /sys/fs/cgroup
tmpfs           1.9G   33k  1.9G   1% /tmp
tmpfs           379M  103k  379M   1% /run/user/999
/dev/loop1       29M   29M     0 100% /snap/snapd/7264
/dev/loop2       58M   58M     0 100% /snap/core18/1705
/dev/loop3       18M   18M     0 100% /snap/ubuntu-budgie-welcome/190
/dev/loop4       66M   66M     0 100% /snap/gtk-common-themes/1506
/dev/loop5      167M  167M     0 100% /snap/chromium/1229
/dev/sdb1       7.8G  175M  7.6G   3% /media/ubuntu-budgie/B67F-4BDE
ubuntu-budgie@ubuntu-budgie:~$ sudo lsblk -o size -f 
  SIZE
  1.5G
 27.1M
   55M
 16.5M
 62.1M
158.4M
931.5G
  7.2G
  7.2G
 28.7G
 28.7G
 1024M
ubuntu-budgie@ubuntu-budgie:~$ uname -sr 
Linux 5.4.0-26-generic
ubuntu-budgie@ubuntu-budgie:~$ 

[zelandonii]

Alors là @rodriguem7973 , je te laisse la main car c'est au-dessus de mes connaissances en lignes de commandes.

[Invité]

bonjour

comme zelandonii  a dit  réinstaller windows 10 avec clé après ubuntu 20.04

parce que tu dis plus de widnows qui remplacer linux mint ? c'est tu parles ?