tintin5356

OKay, je vais en trouver et ensuite faire l'installation windows, drivers pour que j'ai mes ports USB utilisables. Merci bonne soirée, je vous redirais si BSOD sous W7.

Mon clavier et ma souris sont en filaire (usb)

J'ai lancé l'installation Windows 7 mais des la première fenêtre (choix des langues/) j'ai plus de souris ni clavier. En regardant Windows 7 ne prend pas en charge les ports USB 3.0. j'ai donc essayé de mettre la clé bootable derrière et juste le clavier devant mais rien y fait. Avez vous un conseil ?

Pour windows 7, je vais prendre cette version: Je vais utiliser Ventoy, mais est-ce nécessaire d'utiliser WBU?

Okay très bien merci. Car en écoutant le vendeur (matériel.net) il faudrait envoyer la CM et CPU pour test et diag mais ils prennent un billet pour ca...

Très bien. J'allais vous demander cette option. Je vous tiens au courant. D'après vous, est-ce que cela pourrait être un problème matériel (CM, CPU) ou bien c'est sur que c'est un problème de soft?

Ok merci. Sinon avez-vous une idée pour les BSOD malgré les mises à jour de la CM, CG?

Ca a replanté 2 fois.... On Tue 26/01/2021 16:19:05 your computer crashed or a problem was reported crash dump file: C:\Windows\minidump\012621-6890-01.dmp This was probably caused by the following module: ntoskrnl.exe (nt+0x1C1220) Bugcheck code: 0xA (0x4, 0x2, 0x1, 0xFFFFF8052EFC8576) Error: IRQL_NOT_LESS_OR_EQUAL file path: C:\Windows\system32\ntoskrnl.exe product: Microsoft® Windows® Operating System company: Microsoft Corporation description: NT Kernel & System Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above. This is a software bug. This bug check belongs to the crash dump test that you have performed with WhoCrashed or other software. It means that a crash dump file was properly written out. The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time. On Tue 26/01/2021 16:19:05 your computer crashed or a problem was reported crash dump file: C:\Windows\MEMORY.DMP This was probably caused by the following module: ntkrnlmp.exe (nt!setjmpex+0x8209) Bugcheck code: 0xA (0x4, 0x2, 0x1, 0xFFFFF8052EFC8576) Error: IRQL_NOT_LESS_OR_EQUAL Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above. This is a software bug. This bug check belongs to the crash dump test that you have performed with WhoCrashed or other software. It means that a crash dump file was properly written out. The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time. On Tue 26/01/2021 09:52:21 your computer crashed or a problem was reported crash dump file: C:\Windows\minidump\012621-6843-01.dmp This was probably caused by the following module: ntoskrnl.exe (nt+0x1C1220) Bugcheck code: 0xA (0xFFFFD0890371592C, 0xFF, 0x8A, 0xFFFFF807619EE243) Error: IRQL_NOT_LESS_OR_EQUAL file path: C:\Windows\system32\ntoskrnl.exe product: Microsoft® Windows® Operating System company: Microsoft Corporation description: NT Kernel & System Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above. This is a software bug. This bug check belongs to the crash dump test that you have performed with WhoCrashed or other software. It means that a crash dump file was properly written out. The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

C'est peut être une question bête, mais comment voir si tous ls drivers sont bien installés?

J'ai mis à jour ma CG avec un pilote antérieur. POur la CM, J'ai tout réinstallé pour être sur. Pr contre pour VGA drivers, j'obtiens ca à chaque fois: Est-ce normal? A voir si cela suffit. Pour le driver AMD CPU pouvez vous me transmettre le lien du forum pour avoir les informations sur une éventuelle résolution?? De plus serait-ce une solution de faire la manip de l'un des membres (je n'ai pas trouvé les paramètres dans le bios)? "Bonsoir, désolé pour mon absence, Depuis que j'ai désactivé "Core Performance Boost" et "AMD Cool&Quiet function", le pc a l'air beaucoup plus stable, je n'ai pas eu de nouveau BSOD. Voici quand même deux images de ryzen master, la première correspond au démarrage du pc, la seconde une vingtaine de minutes plus tard, j'ai aussi remarqué qu'on peux sélectionner un mode "auto OC" :"

Oui en effet je n'ai pas de CG intégrée mais alors comment résoudre ce pb? Et oui j'ai une nvdia, GTX 1650 (pilotes à jour). POurquoi y a t il un pb de CG?

En cherchant la résolution du problème, j'ai vu que vous étiez sur un sujet qui pourrait s'en approcher.

Suite à vos instructions, j'ai tout réinstallé et bim un BSOD. Je vois que c 'est à cause d'un driver. Je n vois pas comment le mettre à jour. On Mon 25/01/2021 18:00:56 your computer crashed or a problem was reported crash dump file: C:\Windows\minidump\012521-8031-01.dmp This was probably caused by the following module: amdppm.sys (amdppm+0x206c) Bugcheck code: 0x133 (0x0, 0x501, 0x500, 0xFFFFF80134173358) Error: DPC_WATCHDOG_VIOLATION file path: C:\Windows\system32\drivers\amdppm.sys product: Microsoft® Windows® Operating System company: Microsoft Corporation description: Processor Device Driver Bug check description: The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above. This could be caused by either a non-responding driver or non-responding hardware. This bug check can also occur because of overheated CPUs (thermal issue). The crash took place in a Microsoft module. The description of the module may give a hint about a non responding device in the system. On Mon 25/01/2021 18:00:56 your computer crashed or a problem was reported crash dump file: C:\Windows\MEMORY.DMP This was probably caused by the following module: nvlddmkm.sys (nvlddmkm+0x79b9b) Bugcheck code: 0x133 (0x0, 0x501, 0x500, 0xFFFFF80134173358) Error: DPC_WATCHDOG_VIOLATION file path: C:\Windows\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_3621da861144492b\nvlddmkm.sys product: NVIDIA Windows Kernel Mode Driver, Version 461.09 company: NVIDIA Corporation description: NVIDIA Windows Kernel Mode Driver, Version 461.09 Bug check description: The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above. This could be caused by either a non-responding driver or non-responding hardware. This bug check can also occur because of overheated CPUs (thermal issue). A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: nvlddmkm.sys (NVIDIA Windows Kernel Mode Driver, Version 461.09 , NVIDIA Corporation). Google query: nvlddmkm.sys NVIDIA Corporation DPC_WATCHDOG_VIOLATION On Mon 25/01/2021 18:29:42 your computer crashed or a problem was reported crash dump file: C:\Windows\minidump\012521-7546-01.dmp This was probably caused by the following module: ntoskrnl.exe (nt+0x1C1220) Bugcheck code: 0xA (0x0, 0x2, 0x1, 0xFFFFF80012E67D9F) Error: IRQL_NOT_LESS_OR_EQUAL file path: C:\Windows\system32\ntoskrnl.exe product: Microsoft® Windows® Operating System company: Microsoft Corporation description: NT Kernel & System Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above. This is a software bug. This bug check belongs to the crash dump test that you have performed with WhoCrashed or other software. It means that a crash dump file was properly written out. The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time. On Mon 25/01/2021 18:29:42 your computer crashed or a problem was reported crash dump file: C:\Windows\MEMORY.DMP This was probably caused by the following module: ntkrnlmp.exe (nt!setjmpex+0x8209) Bugcheck code: 0xA (0x0, 0x2, 0x1, 0xFFFFF80012E67D9F) Error: IRQL_NOT_LESS_OR_EQUAL Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above. This is a software bug. This bug check belongs to the crash dump test that you have performed with WhoCrashed or other software. It means that a crash dump file was properly written out. The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

okay , je préfère m'assurer de bien faire. JE vous tiens au courant.

OK donc j'installe Windows sans internet, ensuite j'execute WBU préalablement mis sur une clé usb, et ensuite installation des drivers. C'est bien ca?

Merci, Je télécharge cela (1h) et je procède à l’installation de Windows, au blocage des updates et aux mises à jour de la CM, et je vous redis si çà plante. Est-ce que je fais les mises à jour de la CG, carte wifi ou tout autre pilote?

OKay je vais tenter. Lors de la prépa de la clé avec Ventoy, où sont les fichiers à copier? J'ai lancé et formaté ma clé usb avec Ventoy par contre je ne trouve pas les fameux fichiers à copier dessus.

Pour la création de la clé USB, y -a-t-il une importance de télécharger l'outil sur le pc ayant les BSOD ou un autre?

J'ai procédé aux mises à jour après installation. En faisant des recherches, l'utilisation d'une version postérieure de Windows 10 1803 serait peut-être la source du problème. Qu'en dites-vous?

Un nouvel BSOD: On Mon 25/01/2021 13:53:23 your computer crashed or a problem was reported crash dump file: C:\Windows\Minidump\012521-5625-01.dmp This was probably caused by the following module: ntoskrnl.exe (nt+0x3F5780) Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8060AC4C847, 0xFFFFA183DE540CC0, 0x0) Error: SYSTEM_SERVICE_EXCEPTION file path: C:\Windows\system32\ntoskrnl.exe product: Microsoft® Windows® Operating System company: Microsoft Corporation description: NT Kernel & System Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code. This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time. Pour l'installation j'ai suivi les mêmes étapes que dans la vidéo: 1) Téléchargé l'outil de création de clé bootable sur mon pc fixe 2) Redémarrer le pc et accéder au BIOS 3) Choisis ma clé usb branché sur un port 2.0 et démarré 4)Supprimer toutes mes partitions 5)Et ensuite suivi les différentes étapes Connexion internet filaire RJ45

2803. Je vous laisse vérifier sur le site d Asus que c'est bien la dernière version.

J'ai eu 2 autres BSOD. En faisant quelques recherches il y a quelques pistes qui ressortent: -Utiliser une version Windows 10 antérieure à la version 1803? -La mise en veille à désactiver? -Désactiver Dual Access dans le BIOS? Je n'ai pas trouvé ce paramètre -Des paramètres /réglages à faire dans le BIOS? -Une erreur de lecture dans le disque qui contient les fichiers d'échanges de Windows? -Carte mère / CPU défectueux? QU'en pensez-vous? Avez-vous d'autres idées? On Mon 25/01/2021 13:01:01 your computer crashed or a problem was reported crash dump file: C:\Windows\Minidump\012521-6093-01.dmp This was probably caused by the following module: ntoskrnl.exe (nt+0x3F5780) Bugcheck code: 0x139 (0x3, 0xFFFF868EA9A99640, 0xFFFF868EA9A99598, 0x0) Error: KERNEL_SECURITY_CHECK_FAILURE file path: C:\Windows\system32\ntoskrnl.exe product: Microsoft® Windows® Operating System company: Microsoft Corporation description: NT Kernel & System Bug check description: The kernel has detected the corruption of a critical data structure. The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time. On Mon 25/01/2021 13:01:01 your computer crashed or a problem was reported crash dump file: C:\Windows\MEMORY.DMP This was probably caused by the following module: ntkrnlmp.exe (nt!setjmpex+0x8299) Bugcheck code: 0x139 (0x3, 0xFFFF868EA9A99640, 0xFFFF868EA9A99598, 0x0) Error: KERNEL_SECURITY_CHECK_FAILURE Bug check description: The kernel has detected the corruption of a critical data structure. The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time. On Mon 25/01/2021 12:14:15 your computer crashed or a problem was reported crash dump file: C:\Windows\Minidump\012521-6359-01.dmp This was probably caused by the following module: ntoskrnl.exe (nt+0x3F5780) Bugcheck code: 0x1A (0x61941, 0x7FFB1EA8C034, 0x1D, 0xFFFFDF82DCC5AB00) Error: MEMORY_MANAGEMENT file path: C:\Windows\system32\ntoskrnl.exe product: Microsoft® Windows® Operating System company: Microsoft Corporation description: NT Kernel & System Bug check description: This indicates that a severe memory management error occurred. This might be a case of memory corruption. This may be because of a hardware issue such as faulty RAM, overheating (thermal issue) or because of a buggy driver. This problem might also be caused because of overheating (thermal issue). The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

Bonjour, Après avoir réinstallé Windows via un port USB 2.0, le pc a planté à nouveau. La cause serait un problème de mémoire? Je ne comprends pas ma RAM est OK. On Mon 25/01/2021 11:35:45 your computer crashed or a problem was reported crash dump file: C:\Windows\Minidump\012521-6984-01.dmp This was probably caused by the following module: ntoskrnl.exe (nt+0x3F5780) Bugcheck code: 0x1A (0x61941, 0x7FFCF668C034, 0x1D, 0xFFFF83895A8F4B00) Error: MEMORY_MANAGEMENT file path: C:\Windows\system32\ntoskrnl.exe product: Microsoft® Windows® Operating System company: Microsoft Corporation description: NT Kernel & System Bug check description: This indicates that a severe memory management error occurred. This might be a case of memory corruption. This may be because of a hardware issue such as faulty RAM, overheating (thermal issue) or because of a buggy driver. This problem might also be caused because of overheating (thermal issue). The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time. On Mon 25/01/2021 11:35:45 your computer crashed or a problem was reported crash dump file: C:\Windows\MEMORY.DMP This was probably caused by the following module: ntkrnlmp.exe (nt!memset+0xFE04) Bugcheck code: 0x1A (0x61941, 0x7FFCF668C034, 0x1D, 0xFFFF83895A8F4B00) Error: MEMORY_MANAGEMENT Bug check description: This indicates that a severe memory management error occurred. This might be a case of memory corruption. This may be because of a hardware issue such as faulty RAM, overheating (thermal issue) or because of a buggy driver. This problem might also be caused because of overheating (thermal issue). The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

Oui je vais ressayer ca. Si c'est ca chapeau à toi. Je reviens vers vous dès que j'ai des nouvelles. En attendant merci pour votre temps et bonne soirée.

C'est bien ca ? Je n'ai pas la même chose que vous. Est-ce lié à vos recherches où il faut peut être refaire une installation via les ports usb à l'arrière de la tour (usb 2.0)?