meridian-shaft Jump to content
Forums

Ecran bleu :whea_uncorrectable_error


Recommended Posts

Bonjour,

J'ai des écrans bleus aléatoirement sous Windows 10 avec le message d'erreur : whea_uncorrectable_error.

J'ai fait une réinstallation complété de windows.
J'ai retirer ma CG.
Retiré mon second Disque dur.
Fait un reseating des RAMS.

J'ai démarré en mode sans échec pendant une petite heure et je n'ai pas eu de plantage..

Je ne vois pas ce que ça pourrait être, une idée svp? 

Voici les erreurs dans Who Crashed : 

On Mon 13/04/2020 11:27:05 your computer crashed or a problem was reported
crash dump file: C:\Windows\Minidump\041320-5125-01.dmp
This was probably caused by the following module: hal.dll (hal+0x47FE8) 
Bugcheck code: 0x124 (0x0, 0xFFFFC70DC9421028, 0xF6000A80, 0x40150)
Error: WHEA_UNCORRECTABLE_ERROR
file path: C:\Windows\system32\hal.dll
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Hardware Abstraction Layer DLL
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA). 
This is likely to be caused by a hardware problem. 
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time. 


On Mon 13/04/2020 11:27:05 your computer crashed or a problem was reported
crash dump file: C:\Windows\MEMORY.DMP
This was probably caused by the following module: pshed.dll (PSHED!PshedBugCheckSystem+0x10) 
Bugcheck code: 0x124 (0x0, 0xFFFFC70DC9421028, 0xF6000A80, 0x40150)
Error: WHEA_UNCORRECTABLE_ERROR
file path: C:\Windows\system32\pshed.dll
product: Système d’exploitation Microsoft® Windows®
company: Microsoft Corporation
description: Pilote d’erreurs matérielles spécifiques à une plateforme
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA). 
This is likely to be caused by a hardware problem. 
The crash took place in a Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.


Merci ;)

Link to comment
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...